01
Peel a small section
Pick a canvas and peel back the protective film. Save the film for later use when taking a break.
YOUR GUIDE TO PAUSING
Need a little help? Start here.
Everything you need to pick a kit, get started, and make the most of your pause.
PICK YOUR PAUSE
What are you making?
WHAT'S IN THE BOX
Everything's already here.
All that's left to do is find your spot and get making.
- Pre-printed canvas
- Resin diamonds
- Applicator pen
- Multiplacer tool
- Heart-shaped wax
- Diamond tray
- Tweezers
- Instruction manual
- Re-sealable bags
- Code sticker sheet
BEFORE YOU START
A few things that make it easier.
Don't peel the whole canvas at once.
Work in small sections. It keeps the canvas clean, stops the diamonds from sticking where they shouldn't, and makes the whole thing feel much less overwhelming.
STEP BY STEP
Tiny diamonds. One step at a time.
02
Find your colour
Pick a code from the canvas, find the associated diamonds packet, and empty it out on the tray.
03
Load your applicator
Push the tip of the applicator tool into the wax to make it sticky and pick up the diamonds.
04
Pick, place, press
Pick up a diamond and place it on the corresponding symbol on the canvas and lightly press down to secure.
05
Keep going
Repeat the steps with each code. When you're done, pour the remaining diamonds back into the resealable bag.
06
Frame & display
Turn your completed diamond painting into a work of art by framing it. Showcase your creativity for all to admire.
WATCH THE TUTORIAL
Prefer to watch someone do it?
A step-by-step tutorial for getting started.
TIPS & TRICKS
Things we wish someone told us.
Work in small sections instead of uncovering the entire canvas.
Good lighting makes matching symbols much easier.
Keep your diamonds in the tray while you're working.
If a diamond looks upside down, don't panic. Just turn it around.
Taking a break? Cover your canvas before you walk away.
Don't worry about making it perfect. The little imperfections
are part of making it yourself.
WHAT'S IN THE BOX
All the good stuff.
Your canvas, wool and hook are ready. Now it's just you and a little bit of looping.
- Pre-printed latch hook canvas
- Pre-cut wool strands
- Latch hook tool
- Colour reference guide
- Instruction manual
BEFORE YOU START
Give yourself a minute to get the hang of it.
The first 5–10 minutes might feel awkward.
That's completely normal. Give yourself a little time to get used to the movement. Once you get it, you'll get it.
STEP BY STEP
Loop. Pull. Repeat.
01
Pick a colour
Choose a colour from your design and grab one piece of the pre-cut wool.
02
Load the wool
Fold the wool in half and place the folded section around the latch hook.
03
Go under one mesh bar
Push the hook through the canvas from front to back, going under one mesh bar.
04
Catch the wool
Keep the folded part of the wool behind the mesh and place the two loose ends into the hook.
05
Close & pull
Pull the hook back through the mesh. The latch closes around the wool as you pull it through.
06
Keep going
Give the wool a gentle tug to settle it into place, then repeat until your design starts filling in.
WATCH THE TUTORIAL
Prefer to watch someone do it?
Tutorial coming soon.
TIPS & TRICKS
Things we wish someone told us.
Give yourself 5–10 minutes to get used to the movement.
Your canvas is already colour coded, so use it as your guide.
Don't worry about making it perfect. Your first few knots
might look a little wonky.
Work in whichever section feels easiest and take breaks
whenever you want.
Put on something you like listening to and settle in.
Once you're done, gently run a lint roller over the surface to pick up any small, loose wool fibres.
Trim any longer wool strands so the surface sits at an even height and looks nice and level.
STILL STUCK?
Questions? We're here.
Have a question about your kit, a step that isn't making sense, or just want to check something before you start? We're happy to help.